Thanks! Your question has been posted.
Member Sewcial
Have a question that you need to find the answer to? Simply type it into the box below, along with any images, and one of our wonderful members will provide an answer.
You may also like to take a look at our FAQs or browse previously answered questions listed below. Who knows, someone else might be stuck on the same thing as you!
-
-
Hello! I really want to have a go at quilting and the 2022 block of the month has inspired me to give it a go. Any advice on where to start? Would one of the previous years blocks be a good start? I?m thinking that the project maybe a bit beyond my skills.
Louise replied: 23 Dec 21 at 12:15
Thank you. That sounds a good plan. I will give that a go first.
-
I want to use a christmas fabric for Rosie the Reindeer, rather than fleece (have made loads of fleece ones) Do i need to interface the fabric? Its Cotton. Thank you
Jilly - (FB Wispa Labrador) replied: 10 Dec 21 at 17:18
Thank you
-
Hi Im certain I watched a Debbie Shore tutorial about putting a zip in the back of a cushion and folding the fabric to conceal the zip. However Ive now spent over 2 hours looking for it !! Can anyone jog my memory please ?
Jilly - (FB Wispa Labrador) replied: 7 Dec 21 at 13:17
You can try this one.... https://www.youtube.com/watch?v=AwFUypfeMQE
-
hi my machine skips stitches when sewing fleece what needle do you suggest to use. Can anyone help please
Jilly - (FB Wispa Labrador) replied: 7 Dec 21 at 13:18
I just used a universal one.. perhaps try adjusting the tension and also cleaning the sewing machine.
-
-
Hi Debbie & Team, Please can you recommend the best fabric glue to use? Thanks you Lorraine
Megan replied: 6 Dec 21 at 07:35
It would depend what type you were looking for this is great https://debbieshoresewing.com/haberdashery/adhesives/gutermann-ht2-wet-textile-glue/ these pens are out of stock at the moment but they are good for holding things in place like a zip while you sew https://debbieshoresewing.com/haberdashery/adhesives/sewline-fabric-glue-pen-and-refill/ and then there is this spray glue 250ml: https://debbieshoresewing.com/haberdashery/odif-505-temporary-fabric-adhesive-spray-250ml/ 500ml: https://debbieshoresewing.com/haberdashery/adhesives/odif-505-temporary-fabric-adhesive-spray-500ml/
-
Hi all, help! I am zigzagging round some letters and the stitch isn't catching some of the time so get straight stitches mixed with zigzag. I have rethreaded machine , changed needle. It was working fine yesterday. Any suggestions?
Anne replied: 5 Dec 21 at 22:26
Check your bobbin area for a bit of fluff or loose thread.
-
Good morning everyone, does anyone remember when Debbie made a washbag/makeup bag using cork and faux leather. I can't find a video - hoping there is one (-;
Jilly - (FB Wispa Labrador) replied: 7 Dec 21 at 13:21
https://www.youtube.com/watch?v=D8tFU5ETV_M
-
Hi Debbie been organising my shelves today and here is my sewing section with my machine tools mat and of course all your AMAZING books x
Megan replied: 5 Dec 21 at 16:25
Thanks debbie
-
-
-
-
Is sewing a housecoat for 4 to 5 years difficult and does anyone have a pattern please
Debbie replied: 5 Dec 21 at 09:52
I would imagine it's quite simple, I don't have a pattern but take a look at the Mccalls website, there's bound to be one there!
-
Hi when emailing in for the 12 days of Christmas giveaways, do you have to do a different email for each giveaway you want to enter, or just put all the dates on one email. Sorry if this has been covered previously.
Megan replied: 3 Dec 21 at 20:57
I put it all in one email
-
I want to make the Christmas 2020 table runner and placemats. Could I use felt for the Christmas trees and a mixture of fabric and felt for the snowman?
Debbie replied: 5 Dec 21 at 09:53
I think that would work well!
-
I am considering buying a magnetic seam guide for my janome dc3050 but have read so many different things about these I am now not sure if it is safe to use. Has anyone got one of these that they use on the computerised machine or can suggest an alternative.
Sharon replied: 6 Dec 21 at 08:23
Thanks I have read so many different articles about them affecting machines electronics because of the magnet but need a way of getting a good straight seam. I don't know if there are any other methods people use to do this so I can explore all options.
-
Hi there, Debbie mentioned that to get 10% on her site for materials etc you fill in the coupon code. What is it? I'm a newbie and am still finding my way around! So looking forward to being part of this community.
Mary replied: 1 Dec 21 at 14:27
Thank you, Barb, I've found it!
